#include "stm32f7xx_hal_rcc.h"#include "stm32f7xx_hal_exti.h"#include "stm32f7xx_hal_gpio.h"#include "stm32f7xx_hal_dma.h"#include "stm32f7xx_hal_cortex.h"#include "stm32f7xx_hal_adc.h"#include "stm32f7xx_hal_can.h"#include "stm32f7xx_hal_flash.h"#include "stm32f7xx_hal_i2c.h"#include "stm32f7xx_hal_pwr.h"#include "stm32f7xx_hal_spi.h"#include "stm32f7xx_hal_tim.h"#include "stm32f7xx_hal_uart.h"
Go to the source code of this file.
Macros | |
| #define | HAL_MODULE_ENABLED |
| This is the list of modules to be used in the HAL driver. More... | |
| #define | HAL_ADC_MODULE_ENABLED |
| #define | HAL_CAN_MODULE_ENABLED |
| #define | HAL_SPI_MODULE_ENABLED |
| #define | HAL_TIM_MODULE_ENABLED |
| #define | HAL_UART_MODULE_ENABLED |
| #define | HAL_GPIO_MODULE_ENABLED |
| #define | HAL_EXTI_MODULE_ENABLED |
| #define | HAL_DMA_MODULE_ENABLED |
| #define | HAL_RCC_MODULE_ENABLED |
| #define | HAL_FLASH_MODULE_ENABLED |
| #define | HAL_PWR_MODULE_ENABLED |
| #define | HAL_I2C_MODULE_ENABLED |
| #define | HAL_CORTEX_MODULE_ENABLED |
| #define | HSE_VALUE ((uint32_t)8000000U) |
| Adjust the value of External High Speed oscillator (HSE) used in your application. This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL). More... | |
| #define | HSE_STARTUP_TIMEOUT ((uint32_t)100U) |
| #define | HSI_VALUE ((uint32_t)16000000U) |
| Internal High Speed oscillator (HSI) value. This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL). More... | |
| #define | LSI_VALUE ((uint32_t)32000U) |
| Internal Low Speed oscillator (LSI) value. More... | |
| #define | LSE_VALUE ((uint32_t)32768U) |
| External Low Speed oscillator (LSE) value. More... | |
| #define | LSE_STARTUP_TIMEOUT ((uint32_t)5000U) |
| #define | EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) |
| External clock source for I2S peripheral This value is used by the I2S HAL module to compute the I2S clock source frequency, this source is inserted directly through I2S_CKIN pad. More... | |
| #define | VDD_VALUE 3300U |
| This is the HAL system configuration section. More... | |
| #define | TICK_INT_PRIORITY ((uint32_t)0U) |
| #define | USE_RTOS 0U |
| #define | PREFETCH_ENABLE 0U |
| #define | ART_ACCELERATOR_ENABLE 0U /* To enable instruction cache and prefetch */ |
| #define | USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ |
| #define | USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ |
| #define | USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ |
| #define | USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ |
| #define | USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ |
| #define | USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ |
| #define | USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ |
| #define | USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ |
| #define | USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ |
| #define | USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ |
| #define | USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ |
| #define | USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ |
| #define | USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ |
| #define | USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ |
| #define | USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ |
| #define | USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ |
| #define | USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ |
| #define | USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ |
| #define | USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ |
| #define | USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ |
| #define | USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ |
| #define | USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ |
| #define | USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ |
| #define | USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ |
| #define | USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ |
| #define | USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ |
| #define | USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ |
| #define | USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ |
| #define | USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ |
| #define | USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ |
| #define | USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ |
| #define | USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ |
| #define | USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ |
| #define | USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ |
| #define | USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ |
| #define | USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ |
| #define | USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ |
| #define | USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ |
| #define | MAC_ADDR0 2U |
| Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code. More... | |
| #define | MAC_ADDR1 0U |
| #define | MAC_ADDR2 0U |
| #define | MAC_ADDR3 0U |
| #define | MAC_ADDR4 0U |
| #define | MAC_ADDR5 0U |
| #define | ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ |
| #define | ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ |
| #define | ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ |
| #define | ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ |
| #define | DP83848_PHY_ADDRESS |
| #define | PHY_RESET_DELAY ((uint32_t)0x000000FFU) |
| #define | PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) |
| #define | PHY_READ_TO ((uint32_t)0x0000FFFFU) |
| #define | PHY_WRITE_TO ((uint32_t)0x0000FFFFU) |
| #define | PHY_BCR ((uint16_t)0x0000U) |
| #define | PHY_BSR ((uint16_t)0x0001U) |
| #define | PHY_RESET ((uint16_t)0x8000U) |
| #define | PHY_LOOPBACK ((uint16_t)0x4000U) |
| #define | PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) |
| #define | PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) |
| #define | PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) |
| #define | PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) |
| #define | PHY_AUTONEGOTIATION ((uint16_t)0x1000U) |
| #define | PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) |
| #define | PHY_POWERDOWN ((uint16_t)0x0800U) |
| #define | PHY_ISOLATE ((uint16_t)0x0400U) |
| #define | PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) |
| #define | PHY_LINKED_STATUS ((uint16_t)0x0004U) |
| #define | PHY_JABBER_DETECTION ((uint16_t)0x0002U) |
| #define | PHY_SR ((uint16_t)) |
| #define | PHY_SPEED_STATUS ((uint16_t)) |
| #define | PHY_DUPLEX_STATUS ((uint16_t)) |
| #define | USE_SPI_CRC 0U |
| #define | assert_param(expr) ((void)0U) |
| Include module's header file. More... | |
Macro Definition Documentation
◆ ART_ACCELERATOR_ENABLE
| #define ART_ACCELERATOR_ENABLE 0U /* To enable instruction cache and prefetch */ |
Definition at line 152 of file stm32f7xx_hal_conf.h.
◆ assert_param
| #define assert_param | ( | expr | ) | ((void)0U) |
Include module's header file.
Definition at line 476 of file stm32f7xx_hal_conf.h.
◆ DP83848_PHY_ADDRESS
| #define DP83848_PHY_ADDRESS |
Definition at line 221 of file stm32f7xx_hal_conf.h.
◆ ETH_RX_BUF_SIZE
| #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ |
Definition at line 213 of file stm32f7xx_hal_conf.h.
◆ ETH_RXBUFNB
| #define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ |
Definition at line 215 of file stm32f7xx_hal_conf.h.
◆ ETH_TX_BUF_SIZE
| #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ |
Definition at line 214 of file stm32f7xx_hal_conf.h.
◆ ETH_TXBUFNB
| #define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ |
Definition at line 216 of file stm32f7xx_hal_conf.h.
◆ EXTERNAL_CLOCK_VALUE
| #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) |
External clock source for I2S peripheral This value is used by the I2S HAL module to compute the I2S clock source frequency, this source is inserted directly through I2S_CKIN pad.
Value of the Internal oscillator in Hz
Definition at line 138 of file stm32f7xx_hal_conf.h.
◆ HAL_ADC_MODULE_ENABLED
| #define HAL_ADC_MODULE_ENABLED |
Definition at line 41 of file stm32f7xx_hal_conf.h.
◆ HAL_CAN_MODULE_ENABLED
| #define HAL_CAN_MODULE_ENABLED |
Definition at line 42 of file stm32f7xx_hal_conf.h.
◆ HAL_CORTEX_MODULE_ENABLED
| #define HAL_CORTEX_MODULE_ENABLED |
Definition at line 88 of file stm32f7xx_hal_conf.h.
◆ HAL_DMA_MODULE_ENABLED
| #define HAL_DMA_MODULE_ENABLED |
Definition at line 83 of file stm32f7xx_hal_conf.h.
◆ HAL_EXTI_MODULE_ENABLED
| #define HAL_EXTI_MODULE_ENABLED |
Definition at line 82 of file stm32f7xx_hal_conf.h.
◆ HAL_FLASH_MODULE_ENABLED
| #define HAL_FLASH_MODULE_ENABLED |
Definition at line 85 of file stm32f7xx_hal_conf.h.
◆ HAL_GPIO_MODULE_ENABLED
| #define HAL_GPIO_MODULE_ENABLED |
Definition at line 81 of file stm32f7xx_hal_conf.h.
◆ HAL_I2C_MODULE_ENABLED
| #define HAL_I2C_MODULE_ENABLED |
Definition at line 87 of file stm32f7xx_hal_conf.h.
◆ HAL_MODULE_ENABLED
| #define HAL_MODULE_ENABLED |
This is the list of modules to be used in the HAL driver.
Definition at line 38 of file stm32f7xx_hal_conf.h.
◆ HAL_PWR_MODULE_ENABLED
| #define HAL_PWR_MODULE_ENABLED |
Definition at line 86 of file stm32f7xx_hal_conf.h.
◆ HAL_RCC_MODULE_ENABLED
| #define HAL_RCC_MODULE_ENABLED |
Definition at line 84 of file stm32f7xx_hal_conf.h.
◆ HAL_SPI_MODULE_ENABLED
| #define HAL_SPI_MODULE_ENABLED |
Definition at line 66 of file stm32f7xx_hal_conf.h.
◆ HAL_TIM_MODULE_ENABLED
| #define HAL_TIM_MODULE_ENABLED |
Definition at line 67 of file stm32f7xx_hal_conf.h.
◆ HAL_UART_MODULE_ENABLED
| #define HAL_UART_MODULE_ENABLED |
Definition at line 68 of file stm32f7xx_hal_conf.h.
◆ HSE_STARTUP_TIMEOUT
| #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) |
Time out for HSE start up, in ms
Definition at line 101 of file stm32f7xx_hal_conf.h.
◆ HSE_VALUE
| #define HSE_VALUE ((uint32_t)8000000U) |
Adjust the value of External High Speed oscillator (HSE) used in your application. This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL).
Value of the External oscillator in Hz
Definition at line 97 of file stm32f7xx_hal_conf.h.
◆ HSI_VALUE
| #define HSI_VALUE ((uint32_t)16000000U) |
Internal High Speed oscillator (HSI) value. This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL).
Value of the Internal oscillator in Hz
Definition at line 110 of file stm32f7xx_hal_conf.h.
◆ LSE_STARTUP_TIMEOUT
| #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) |
Time out for LSE start up, in ms
Definition at line 129 of file stm32f7xx_hal_conf.h.
◆ LSE_VALUE
| #define LSE_VALUE ((uint32_t)32768U) |
External Low Speed oscillator (LSE) value.
< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature.
Value of the External Low Speed oscillator in Hz
Definition at line 125 of file stm32f7xx_hal_conf.h.
◆ LSI_VALUE
| #define LSI_VALUE ((uint32_t)32000U) |
Internal Low Speed oscillator (LSI) value.
LSI Typical Value in Hz
Definition at line 117 of file stm32f7xx_hal_conf.h.
◆ MAC_ADDR0
| #define MAC_ADDR0 2U |
Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.
Definition at line 205 of file stm32f7xx_hal_conf.h.
◆ MAC_ADDR1
| #define MAC_ADDR1 0U |
Definition at line 206 of file stm32f7xx_hal_conf.h.
◆ MAC_ADDR2
| #define MAC_ADDR2 0U |
Definition at line 207 of file stm32f7xx_hal_conf.h.
◆ MAC_ADDR3
| #define MAC_ADDR3 0U |
Definition at line 208 of file stm32f7xx_hal_conf.h.
◆ MAC_ADDR4
| #define MAC_ADDR4 0U |
Definition at line 209 of file stm32f7xx_hal_conf.h.
◆ MAC_ADDR5
| #define MAC_ADDR5 0U |
Definition at line 210 of file stm32f7xx_hal_conf.h.
◆ PHY_AUTONEGO_COMPLETE
| #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) |
Auto-Negotiation process completed
Definition at line 246 of file stm32f7xx_hal_conf.h.
◆ PHY_AUTONEGOTIATION
| #define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) |
Enable auto-negotiation function
Definition at line 241 of file stm32f7xx_hal_conf.h.
◆ PHY_BCR
| #define PHY_BCR ((uint16_t)0x0000U) |
Transceiver Basic Control Register
Definition at line 232 of file stm32f7xx_hal_conf.h.
◆ PHY_BSR
| #define PHY_BSR ((uint16_t)0x0001U) |
Transceiver Basic Status Register
Definition at line 233 of file stm32f7xx_hal_conf.h.
◆ PHY_CONFIG_DELAY
| #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) |
Definition at line 225 of file stm32f7xx_hal_conf.h.
◆ PHY_DUPLEX_STATUS
| #define PHY_DUPLEX_STATUS ((uint16_t)) |
PHY Duplex mask
Definition at line 254 of file stm32f7xx_hal_conf.h.
◆ PHY_FULLDUPLEX_100M
| #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) |
Set the full-duplex mode at 100 Mb/s
Definition at line 237 of file stm32f7xx_hal_conf.h.
◆ PHY_FULLDUPLEX_10M
| #define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) |
Set the full-duplex mode at 10 Mb/s
Definition at line 239 of file stm32f7xx_hal_conf.h.
◆ PHY_HALFDUPLEX_100M
| #define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) |
Set the half-duplex mode at 100 Mb/s
Definition at line 238 of file stm32f7xx_hal_conf.h.
◆ PHY_HALFDUPLEX_10M
| #define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) |
Set the half-duplex mode at 10 Mb/s
Definition at line 240 of file stm32f7xx_hal_conf.h.
◆ PHY_ISOLATE
| #define PHY_ISOLATE ((uint16_t)0x0400U) |
Isolate PHY from MII
Definition at line 244 of file stm32f7xx_hal_conf.h.
◆ PHY_JABBER_DETECTION
| #define PHY_JABBER_DETECTION ((uint16_t)0x0002U) |
Jabber condition detected
Definition at line 248 of file stm32f7xx_hal_conf.h.
◆ PHY_LINKED_STATUS
| #define PHY_LINKED_STATUS ((uint16_t)0x0004U) |
Valid link established
Definition at line 247 of file stm32f7xx_hal_conf.h.
◆ PHY_LOOPBACK
| #define PHY_LOOPBACK ((uint16_t)0x4000U) |
Select loop-back mode
Definition at line 236 of file stm32f7xx_hal_conf.h.
◆ PHY_POWERDOWN
| #define PHY_POWERDOWN ((uint16_t)0x0800U) |
Select the power down mode
Definition at line 243 of file stm32f7xx_hal_conf.h.
◆ PHY_READ_TO
| #define PHY_READ_TO ((uint32_t)0x0000FFFFU) |
Definition at line 227 of file stm32f7xx_hal_conf.h.
◆ PHY_RESET
| #define PHY_RESET ((uint16_t)0x8000U) |
PHY Reset
Definition at line 235 of file stm32f7xx_hal_conf.h.
◆ PHY_RESET_DELAY
| #define PHY_RESET_DELAY ((uint32_t)0x000000FFU) |
Definition at line 223 of file stm32f7xx_hal_conf.h.
◆ PHY_RESTART_AUTONEGOTIATION
| #define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) |
Restart auto-negotiation function
Definition at line 242 of file stm32f7xx_hal_conf.h.
◆ PHY_SPEED_STATUS
| #define PHY_SPEED_STATUS ((uint16_t)) |
PHY Speed mask
Definition at line 253 of file stm32f7xx_hal_conf.h.
◆ PHY_SR
| #define PHY_SR ((uint16_t)) |
PHY status register Offset
Definition at line 251 of file stm32f7xx_hal_conf.h.
◆ PHY_WRITE_TO
| #define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) |
Definition at line 228 of file stm32f7xx_hal_conf.h.
◆ PREFETCH_ENABLE
| #define PREFETCH_ENABLE 0U |
Definition at line 151 of file stm32f7xx_hal_conf.h.
◆ TICK_INT_PRIORITY
| #define TICK_INT_PRIORITY ((uint32_t)0U) |
tick interrupt priority
Definition at line 149 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_ADC_REGISTER_CALLBACKS
| #define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ |
Definition at line 154 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_CAN_REGISTER_CALLBACKS
| #define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ |
Definition at line 155 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_CEC_REGISTER_CALLBACKS
| #define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ |
Definition at line 156 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_CRYP_REGISTER_CALLBACKS
| #define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ |
Definition at line 157 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_DAC_REGISTER_CALLBACKS
| #define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ |
Definition at line 158 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_DCMI_REGISTER_CALLBACKS
| #define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ |
Definition at line 159 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_DFSDM_REGISTER_CALLBACKS
| #define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ |
Definition at line 160 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_DMA2D_REGISTER_CALLBACKS
| #define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ |
Definition at line 161 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_DSI_REGISTER_CALLBACKS
| #define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ |
Definition at line 162 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_ETH_REGISTER_CALLBACKS
| #define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ |
Definition at line 163 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_HASH_REGISTER_CALLBACKS
| #define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ |
Definition at line 164 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_HCD_REGISTER_CALLBACKS
| #define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ |
Definition at line 165 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_I2C_REGISTER_CALLBACKS
| #define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ |
Definition at line 166 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_I2S_REGISTER_CALLBACKS
| #define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ |
Definition at line 167 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_IRDA_REGISTER_CALLBACKS
| #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ |
Definition at line 168 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_JPEG_REGISTER_CALLBACKS
| #define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ |
Definition at line 169 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_LPTIM_REGISTER_CALLBACKS
| #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ |
Definition at line 170 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_LTDC_REGISTER_CALLBACKS
| #define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ |
Definition at line 171 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_MDIOS_REGISTER_CALLBACKS
| #define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ |
Definition at line 172 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_MMC_REGISTER_CALLBACKS
| #define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ |
Definition at line 173 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_NAND_REGISTER_CALLBACKS
| #define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ |
Definition at line 174 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_NOR_REGISTER_CALLBACKS
| #define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ |
Definition at line 175 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_PCD_REGISTER_CALLBACKS
| #define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ |
Definition at line 176 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_QSPI_REGISTER_CALLBACKS
| #define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ |
Definition at line 177 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_RNG_REGISTER_CALLBACKS
| #define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ |
Definition at line 178 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_RTC_REGISTER_CALLBACKS
| #define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ |
Definition at line 179 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_SAI_REGISTER_CALLBACKS
| #define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ |
Definition at line 180 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_SD_REGISTER_CALLBACKS
| #define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ |
Definition at line 181 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_SDRAM_REGISTER_CALLBACKS
| #define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ |
Definition at line 183 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_SMARTCARD_REGISTER_CALLBACKS
| #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ |
Definition at line 182 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_SMBUS_REGISTER_CALLBACKS
| #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ |
Definition at line 186 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_SPDIFRX_REGISTER_CALLBACKS
| #define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ |
Definition at line 185 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_SPI_REGISTER_CALLBACKS
| #define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ |
Definition at line 187 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_SRAM_REGISTER_CALLBACKS
| #define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ |
Definition at line 184 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_TIM_REGISTER_CALLBACKS
| #define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ |
Definition at line 188 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_UART_REGISTER_CALLBACKS
| #define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ |
Definition at line 189 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_USART_REGISTER_CALLBACKS
| #define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ |
Definition at line 190 of file stm32f7xx_hal_conf.h.
◆ USE_HAL_WWDG_REGISTER_CALLBACKS
| #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ |
Definition at line 191 of file stm32f7xx_hal_conf.h.
◆ USE_RTOS
| #define USE_RTOS 0U |
Definition at line 150 of file stm32f7xx_hal_conf.h.
◆ USE_SPI_CRC
| #define USE_SPI_CRC 0U |
Definition at line 263 of file stm32f7xx_hal_conf.h.
◆ VDD_VALUE
| #define VDD_VALUE 3300U |
This is the HAL system configuration section.
Value of VDD in mv
Definition at line 148 of file stm32f7xx_hal_conf.h.
